Today is the 93rd birthday of Christopher Tolkien, son of J.R.R. Tolkien. He grew up surrounded by his father's creations, and when Tolkien died, he gave up a lecturer's post at Oxford and became his literary executor, publishing his father's unfinished work, like The Silmarillion, Beowulf, and most recently, Beren and Luthien. For years he has been at the front of Tolkien studies, not only by the monumental labor of publishing that he has undertaken, but by seeking to propagate his father's true and unaltered legacy to the many admirers of his books.
I'm sure that most of those reading this are aware of the recent LotR Amazon rights deal (if not, check out this press release). Basically, Amazon has purchased from the Tolkien Estate the global TV rights for both LotR and The Hobbit (not the Silmarillion), and is planning on producing a multiple season show. That bit about the Tolkien Estate is worth revisiting, as it is important to understand the other, lesser-known piece of news that I'll mention below. In 1969 Tolkien himself sold the film rights (not including TV rights) to LotR and the Hobbit to United Artists (later bought by Saul Zaentz, who created Middle-earth Enterprises). This is what allowed Peter Jackson to make his film series, in addition to the earlier Rankin Bass and Ralph Bakshi animated films, and is distinct from the Tolkien Estate, which handles the book rights, and, until recently, the television rights. I was astounded when I discovered that the Christopher Tolkien-led Estate, which had been completely at odds with Jackson over his interpretation ("They gutted my father's book and made it into an action film" was one statement Christopher Tolkien made) would allow Amazon to buy the television rights- it was a very hopeful sign for the show to have Tolkien's son supporting it.
However, far from supporting it, Christopher has resigned from the Estate, which he had led since his father's death. This is very important news, not just because it involves the virtual retirement of the foremost advocate of Tolkien's legacy, but because, as the Amazon deal proves, the Estate is now much more willing to licence Tolkien properties than under Christopher's management.
This probably means that we'll be seeing many more such deals, and a change in what could be called the 'Middle-earth franchise' approaching the changes Disney's takeover made to Star Wars. What the quality of these productions will be is yet to be seen, but after the Jackson films I would say many, including myself, feel pretty pessimistic about their chances.
With all this going on, I thought it fitting that we Tolkiendili should remember Christopher Tolkien and his work- no matter what changes the public perception of Lord of the Rings undergoes, thanks to Christopher, Tolkien's true legacy has been preserved, and is accessible to all who want to discover it.
For this, heartfelt thanks and a hope for a happy birthday!
Tuesday, November 21, 2017
A Change of Pace
It's been a while since I've gotten any non-LotR fantasy miniatures painted! As opposed to my LotR paint jobs, which demand accuracy to the books, my more RPG inspired miniatures give me the freedom to play around with colors and details, to have a little fun painting. This isn't to say I dislike my LotR miniatures, they are one of my favorite things to paint, but it is refreshing to change pace for a little while.
This particular miniature was a freebie with a Reaper Miniatures purchase I made last spring, sculpted for the occasion of Reaper's 25th anniversary. One issue I sometimes have with Reaper, and the larger gaming community, is that the poor miniatures are often overloaded with gear and supersized weapons- I'm glad that with this one they stuck to a more realistic minimum. She's definitely a Rogue, even holding a bag of loot, so I gave her very muted clothes, including a blackened dagger.
The cloak back is an excellent sculpt, it flows very nicely, adding some dynamics to a somewhat static pose. All the armor is supposed to be soft dyed leather- the last thing a Rogue wants is creaking metallic sounds when she's moving. I struggled for a while trying to find good grey tones, but I'm very happy with how they turned out- all slightly different, but not enough that it stands out too much.
Tuesday, November 14, 2017
Aggressive Support
Despite the fact that the E-Wing or the 181st wing's TIE Interceptors never made a screen appearance, they are both relatively well known, appearing several memorable times in the expanded universe. The same cannot be said for the TIE Aggressor. It first appeared in the video game Star Wars Galaxies' Jump to Lightspeed supplement, and until it was made as an X-Wing miniature, it seems to have never reappeared- in fact, I had never heard of it. This is a pity, as it is a good looking TIE variant.
I have heard that, meta-game, it was intended to provide the Imperials with a fighter/bomber similar to a Y-Wing, especially with its rear-mounted turret. While I don't know how this translated in Galaxy terms, the X-Wing game maneuvers seem to grant it a slight advantage over the actual X-Wing, let alone the 'wallowing pig' Y-Wing. Its ability to take missiles, in addition to the ion or laser turret will, I think, prove useful in a support role. More useful, in fact, than the better known TIE bomber, as its added maneuverability and rear-mounted firepower will allow it to engage in dogfights.
All the painting work I did on this miniature was a few details (see below) and a heavy ink wash. Despite the simplicity, I think it adds a great deal of depth to the model.
The turret on the Aggressor (not on this model!) is removable, allowing for the craft to be easily modified for different missions. The same is true for the missile racks which have been left off of the miniature- they fit onto the slots directly above and below the inside solar panel brace. The laser cannon mounts are also supposed to be externally mounted instead of the standard internal mounts shown on the front of miniature.
When you watch the movies and look at stills of the TIE props, they are painted an overall Imperial grey. Even with the 181st Interceptor, the only color is the bloodstripes, there is no mechanical detailing like on Rebel craft. However, as this is supposed to be more of a first run or prototype, I added some slight gunmetal detailing, which can be seen most clearly between the panel lines on the top and belly.
The Aggressor is based on the same basic design as the TIE x1 advanced, flown by Darth Vader at Yavin Four. Like the x1, the Aggressor has limited shields and a hyperdrive, making it a good escort or long range craft. This high cost eventually undid the Aggressor, especially after Endor, when the Empire struggled to keep even the much less expensive Fighters and Interceptors supplied to its forces.
I have heard that, meta-game, it was intended to provide the Imperials with a fighter/bomber similar to a Y-Wing, especially with its rear-mounted turret. While I don't know how this translated in Galaxy terms, the X-Wing game maneuvers seem to grant it a slight advantage over the actual X-Wing, let alone the 'wallowing pig' Y-Wing. Its ability to take missiles, in addition to the ion or laser turret will, I think, prove useful in a support role. More useful, in fact, than the better known TIE bomber, as its added maneuverability and rear-mounted firepower will allow it to engage in dogfights.
All the painting work I did on this miniature was a few details (see below) and a heavy ink wash. Despite the simplicity, I think it adds a great deal of depth to the model.
The turret on the Aggressor (not on this model!) is removable, allowing for the craft to be easily modified for different missions. The same is true for the missile racks which have been left off of the miniature- they fit onto the slots directly above and below the inside solar panel brace. The laser cannon mounts are also supposed to be externally mounted instead of the standard internal mounts shown on the front of miniature.
When you watch the movies and look at stills of the TIE props, they are painted an overall Imperial grey. Even with the 181st Interceptor, the only color is the bloodstripes, there is no mechanical detailing like on Rebel craft. However, as this is supposed to be more of a first run or prototype, I added some slight gunmetal detailing, which can be seen most clearly between the panel lines on the top and belly.
The Aggressor is based on the same basic design as the TIE x1 advanced, flown by Darth Vader at Yavin Four. Like the x1, the Aggressor has limited shields and a hyperdrive, making it a good escort or long range craft. This high cost eventually undid the Aggressor, especially after Endor, when the Empire struggled to keep even the much less expensive Fighters and Interceptors supplied to its forces.
Tuesday, November 7, 2017
Might of the Empire
I couldn't let the E-Wing I posted last week go without an opponent, so I purchased one of my personal favorite Star Wars ships to battle it- a TIE Interceptor. First encountered by the Rebellion in the months leading up to the battle of Endor, it improved upon the TIE Fighter's already considerable maneuverability, while adding improved firepower and visibility. It is also, in my opinion, one of the most lethal looking space fighters inside or out of Star Wars canon, and is flown by some of the greatest aces the Empire has to offer.
The pilots included with the expansion pack show a strong focus on the 181st Imperial Fighter Wing, lead by Baron Soontir Fel, first seen in the Rogue Squadron comic series. This is to my liking, I even added bloodstripes used by the 181st to the side solar panels. The pilot abilities and upgrades included seem to take advantage of the Interceptor's greatest asset, its speed and maneuverability. Turr Phennir (the 181st's XO and later commander) in particular will be able to pull hit and run passes with ease, darting in and out of range to strike at slower Rebel opponents.
I did not do as much detail work on this model as on the E-Wing. In looking back at its only screen appearance in RotJ, the Interceptor is relatively clean and is painted a uniform grey. Weathering was really restricted to a heavy wash and carbon streaking around the laser muzzles. In researching this fighter, I discovered that some argue that the Intercepors at Endor had 10 cannons- four on the wingtips, four inside the cutaway portion of the wings, and two below the cockpit. I re-watched the Endor space sequences specifically looking for this, and all the shots fired appeared to be coming from the wingtips, so I only detailed these.
This shows the bloodstriping to good effect. These stripes were all painted by hand, without masking, so there is some slight deviance in the lines. I was expecting them to be much harder to paint than they ended up being. I had no trouble painting over the actual solar panels, the detailing on them actually helped keep the lines straight.
The twin ion engines, which give the TIE its name, were the only other spot of detail I added. You can also see the extra depth that the ink wash added around the engines and on the inside of the solar panel.
The pilots included with the expansion pack show a strong focus on the 181st Imperial Fighter Wing, lead by Baron Soontir Fel, first seen in the Rogue Squadron comic series. This is to my liking, I even added bloodstripes used by the 181st to the side solar panels. The pilot abilities and upgrades included seem to take advantage of the Interceptor's greatest asset, its speed and maneuverability. Turr Phennir (the 181st's XO and later commander) in particular will be able to pull hit and run passes with ease, darting in and out of range to strike at slower Rebel opponents.
I did not do as much detail work on this model as on the E-Wing. In looking back at its only screen appearance in RotJ, the Interceptor is relatively clean and is painted a uniform grey. Weathering was really restricted to a heavy wash and carbon streaking around the laser muzzles. In researching this fighter, I discovered that some argue that the Intercepors at Endor had 10 cannons- four on the wingtips, four inside the cutaway portion of the wings, and two below the cockpit. I re-watched the Endor space sequences specifically looking for this, and all the shots fired appeared to be coming from the wingtips, so I only detailed these.
This shows the bloodstriping to good effect. These stripes were all painted by hand, without masking, so there is some slight deviance in the lines. I was expecting them to be much harder to paint than they ended up being. I had no trouble painting over the actual solar panels, the detailing on them actually helped keep the lines straight.
The twin ion engines, which give the TIE its name, were the only other spot of detail I added. You can also see the extra depth that the ink wash added around the engines and on the inside of the solar panel.
Squints incoming!
Subscribe to:
Posts (Atom)